Removable Trailer Stake Pocket D-Ring Tie-Down Anchors

A more flexible trailer setup

See how removable D-ring inserts can be positioned around a trailer deck as part of a tie-down setup. Choose suitable chains, straps, and attachment points for the equipment you are securing.

Drop into compatible 2 × 4-inch stake pockets

The insert is designed for standard 2 × 4-inch trailer stake pockets. Lower the body into a compatible pocket, align a pin position, then secure it with the hitch pin and retaining clip; check your actual pocket opening and clearance before ordering.

Bring the D-ring above the pocket

The raised D-ring gives a chain or compatible hook a defined attachment point above the pocket. Its pivoting loop can move toward the direction of the attached chain or strap, as shown in the product demonstration.

Choose from four pin positions

Four aligned hole positions let you select the mounting height that matches your pocket. Pass the hitch pin through the aligned holes and fit the retaining clip to hold the insert in position.

Remove it and reposition it

When you want to change the setup, remove the retaining clip and pin, then lift the insert out. Move it to another compatible stake pocket and secure it again where you need the attachment point.

See the steel construction

The black-finished steel body has a broad back, open channel, and visible welded ring mount beneath the top plate. The close-up shows the construction and pin-hole layout clearly, so you can inspect the design before choosing your pack.

Choose one, two, or four inserts

Pick the pack that suits the number of attachment points you want to add. The single pack includes one D-ring insert with its matching hitch pin and retaining clip; the two-pack includes two inserts with matching pins and clips; the four-pack includes four inserts with matching pins and clips.

The two-pack is shown below.

Compare the four-pack below, then choose your preferred pack in the purchase options.

Product details

• Fit: designed for standard 2 × 4-inch trailer stake pockets; confirm actual opening and clearance.
• Construction: black-finished steel body with a welded pivoting D-ring mount.
• Adjustment: four selectable pin-hole positions.
• Retention: removable hitch pin and retaining clip.
• Pack options: one insert, two inserts, or four inserts, with matching pins and clips.

Frequently asked questions

Will these fit my trailer?

They are designed for standard 2 × 4-inch stake pockets. Measure your actual opening and check access for the pin and clip, since pocket shapes and clearances can vary between trailers.

What is included?

Choose a single insert, two-pack, or four-pack of D-ring inserts. Each insert comes with a matching hitch pin and retaining clip; chains, straps, and the trailer are not included.

Can I remove them after installation?

Yes. Remove the retaining clip and hitch pin, then lift the insert out. You can reinstall it in another compatible pocket using the same pin and clip.

Choose your pack

Check your stake pockets, decide how many attachment points you want, and select the single insert, two-pack, or four-pack below.

View pack options and purchase