Clear Self-Adhesive Door & Window Seal Strip
Clear Self-Adhesive Door & Window Seal Strip
Couldn't load pickup availability
Store-Backed Purchase Support
Shopping Protection & Fast Shipping.
Store policies and direct order support from keepfbshop.
Selected Product Option
1 Roll
Available to orderSecure Shopify Checkout
Payments processed through Shopify checkout.
Protected checkout connectionSupport follows our published store policies. Optional shipping protection is shown separately.
-
Ordered
- - -
Order Ready
- - -
Delivered
Shipping Protection
Shopping Protection & Fast Shipping. Optional — remove anytime before checkout.
Clear Self-Adhesive Door & Window Seal Strip
A Discreet Finish for Everyday Gaps
Cover small gaps around compatible doors and windows with a clear strip that you can measure, trim, and press into place. Its flexible flap sits along the edge while the transparent finish keeps the fitting visually subtle.
Check the gap, mounting surface, and opening clearance before fitting. The strip's overall width is approximately 1.38 inches.
See the Clear Strip in Place
Watch the strip being pressed along a window frame, then see the window open and close with it fitted. A neat position and enough clearance help the flexible edge sit where it is needed.
01 · Cover Gaps at Door and Window Edges
Position the strip along a suitable door bottom, door edge, or window frame so the free flap covers the small gap. The roll format lets you follow a straight edge and choose the section you want to fit.
02 · Peel, Align, and Press into Place
The adhesive band makes installation straightforward. Clean and fully dry the contact area, peel back the release liner, then align the strip and press firmly along its attachment edge. Work a little at a time to keep the line neat.
03 · Trim the Length to Your Project
Measure the edge first, then cut the strip to the length you need with ordinary scissors. Preparing the piece before peeling the backing gives you a manageable section to position along the frame or door.
04 · A Thin, Flexible Flap Along the Edge
The attached band holds the strip in place while the free flap can bend against the adjoining edge. Check the position as you fit it, allowing enough clearance for the door or window to move normally.
05 · Keep the Finished Look Light and Clear
A translucent finish gives the strip a low-visibility look beside glass and painted or wood frames. It is a simple way to add gap coverage while keeping the room's original colors and details in view.
06 · Choose the Roll Count for Your Plans
Choose 1 Roll, 2 Rolls, or 4 Rolls according to the areas you plan to work on. The options contain the same clear strip; the number of rolls changes with the selected pack.
1 Roll
2 Rolls
4 Rolls
Measure First, Then Fit Carefully
Check that the intended edge has enough space for the adhesive band and flexible flap before you start.
- Check the gap, mounting area, and clearance for normal door or window movement.
- Clean the contact surface and allow it to dry fully.
- Measure the edge and trim a piece to the required length with scissors.
- Peel the release liner back gradually, align the strip, and press the adhesive band firmly onto the contact area.
- Open and close the door or window to check that the strip remains correctly positioned without binding. Adjust the placement if needed.
Product Details
- Format: Flexible self-adhesive sealing strip supplied in a roll
- Appearance: Clear/translucent strip
- Overall strip width: Approximately 1.38 inches (35 mm)
- Pack choices: 1 Roll, 2 Rolls, or 4 Rolls
- Profile: Adhesive attachment band with a thin flexible free flap
- Fitting: Measure, cut with scissors, peel backing, and press into position
- Placement: Compatible door bottoms, door edges, and window-frame gaps
A Few Helpful Answers
How wide is the strip?
The overall strip width is approximately 1.38 inches (35 mm). This is the width of the complete strip, including the attachment band; it should not be treated as a maximum gap size. Leave enough contact area and movement clearance for your application.
Can I cut it to fit?
Yes. Measure your intended edge and cut the strip to length with ordinary scissors before peeling the release liner.
How should I prepare the surface?
Choose a suitable contact area, clean it, and let it dry fully. Check the placement before pressing the adhesive band into position, then test normal door or window movement.
Are the pack options different products?
They contain the same clear sealing strip. Choose 1 Roll, 2 Rolls, or 4 Rolls to select the number of rolls in the pack.
Can it be used on doors and windows?
It can be fitted along compatible door and window edges where the flap can cover a small gap. Check the surface, gap shape, and clearance first, then make sure the door or window still opens and closes normally.
Choose Your Roll Count and Start with a Neat Fit
Check your intended edges, prepare the surfaces, and choose the roll count for your project using the purchase options.
Choose Your Pack Size
