Billy Bud Quick-Release Spinning Rod Mount
Billy Bud Quick-Release Spinning Rod Mount
Couldn't load pickup availability
Store-Backed Purchase Support
Shopping Protection & Fast Shipping.
Store policies and direct order support from keepfbshop.
Selected Product Option
Buy 1
Available to orderSecure Shopify Checkout
Payments processed through Shopify checkout.
Protected checkout connectionSupport follows our published store policies. Optional shipping protection is shown separately.
-
Ordered
- - -
Order Ready
- - -
Delivered
Shipping Protection
Shopping Protection & Fast Shipping. Optional — remove anytime before checkout.
Billy Bud Quick-Release Spinning Rod Mount
A Dedicated Spot for Your Spinning Rod
Give your spinning rod a convenient place between casts. Billy Bud holds the rod by the reel in a compact mounted cradle, with quick sideways access when you're ready to pick it up again.
From Stored to In Your Hand
Watch the rod release sideways, return to the padded holder, and sit ready for the next outing.
01 · Grab Your Rod and Go
Keep your spinning rod upright and easy to reach. The quick-release design lets you pull the rod sideways out of the mount, then return it to the cradle when you want your hands free.
02 · A Purpose-Built Holding Mechanism
An integrated lock, four neodymium magnets, and two stainless steel springs make up the retention system. These details work together to hold your rod by the reel while keeping it accessible for your next cast.
03 · Padded Where Your Gear Meets the Mount
Protective padding adds a cushioned contact point inside the holder. It's a thoughtful detail for the place where your spinning rod sits between uses, without a bulky storage setup taking over your space.
04 · Materials Made for Marine Use
The body is made from tough, saltwater-resistant PETG, paired with stainless steel hinge rods and springs. It's a practical combination for keeping your rod close at hand around the boat and along the coast.
05 · Compact Mounting, Clear Installation Options
At approximately 2.40 inches wide and 3.11 inches tall, Billy Bud makes room for your rod without a large rack. Each pack includes 3M mounting tape and a cleaning pad. Built-in screw holes provide another mounting option; the manufacturer recommends using screws for offshore use.
Check the Fit
| Product type | Quick-release mount designed to hold a spinning rod by the reel |
|---|---|
| Dimensions | 61 mm W × 79 mm H × 44 mm L (approximately 2.40 × 3.11 × 1.73 inches) |
| Internal size | 27 mm (approximately 1.06 inches); check your rod and reel geometry before ordering |
| Maximum stated rod weight | 500 g (approximately 17.6 oz) |
| Materials | Saltwater-resistant PETG body; stainless steel hinge rods and springs; protective padding |
| Holding mechanism | Integrated lock, four neodymium magnets, and two stainless steel springs |
| Maximum stated temperature | 70°C / 158°F |
| Included mounting supplies | 3M mounting tape and cleaning pad; screw holes are built into the mount |
| Offshore installation | Use the screw holes with suitable screws, as recommended by the manufacturer |
| Appearance | Gray body with black inner padding and a blue top detail, as shown |
Plan Your Installation
- Choose a mounting position with room for your spinning rod and reel, and check the 27 mm internal fit before installation.
- Prepare the mounting area with the included cleaning pad.
- For a suitable tape-mounted setup, use the included 3M mounting tape. For offshore use, use the built-in screw holes and suitable screws, as recommended by the manufacturer.
- Place the rod into the cradle by the reel. Pull it sideways out of the mount when you're ready to use it.
Helpful Answers
Will it fit my spinning rod?
Billy Bud is designed for spinning rods and has a stated internal size of 27 mm, approximately 1.06 inches. Compare the mount's size and reel-holding design with your own setup before ordering.
How do I remove the rod?
The supplied demonstration shows the rod being pulled sideways out of the mount, then returned into the cradle. The mount holds the rod by the reel.
What's included for mounting?
Each pack includes 3M mounting tape and a cleaning pad. The mount also has screw holes. For screw mounting, choose suitable screws for your mounting surface.
Can I use it offshore?
The manufacturer lists Billy Bud for offshore use and recommends installing it with screws through the built-in screw holes for that use. Do not rely on the included tape alone for an offshore installation.
What is the weight limit?
The manufacturer specifies a maximum rod weight of 500 g, approximately 17.6 oz.
Does the rod and reel come with it?
This listing is for the Billy Bud mount. The fishing rod and reel shown illustrate how the holder is used.
What materials is it made from?
The body is saltwater-resistant PETG, with stainless steel hinge rods and springs, protective padding, four neodymium magnets, and an integrated lock. The maximum stated temperature is 70°C / 158°F.
Give Your Rod a Place of Its Own
Choose a spot, check the fit, and keep your spinning rod within easy reach. Review the mounting details above, then use the product options below when you're ready.
View Purchase Options
