Adjustable Soft-Close Door Hinge — Single Pack
Adjustable Soft-Close Door Hinge — Single Pack
Couldn't load pickup availability
Store-Backed Purchase Support
Shopping Protection & Fast Shipping.
Store policies and direct order support from keepfbshop.
Selected Product Option
Black
Available to orderSecure Shopify Checkout
Payments processed through Shopify checkout.
Protected checkout connectionSupport follows our published store policies. Optional shipping protection is shown separately.
-
Ordered
- - -
Order Ready
- - -
Delivered
Shipping Protection
Shopping Protection & Fast Shipping. Optional — remove anytime before checkout.
Adjustable Soft-Close Door Hinge — Single Pack
A More Controlled Close, Built into the Hinge
An adjustable self-closing hinge brings the pivot, closing adjustment, and hold-open action together at the door edge. Choose Black or Silver to suit your room, then plan the fitting and quantity required for your door.
One hinge per pack. The total number needed depends on your door and installation; check the required quantity, dimensions, and fit with your installer.
Watch the Door Return to Its Frame
See the installed hinge in action as the opened door returns toward the frame. The closing action is adjustable, so setup can be matched to a compatible door and its latch.
01 · Let the Door Return on Its Own
Within the closing range, a correctly installed hinge setup guides the door back toward its frame after you release it. The closing mechanism sits at the hinged edge in a compact hardware design. Choose the number of hinges required for your particular door.
02 · Fine-Tune the Closing Feel
Hex-key adjustment points let your installer tune the closing force and action for the door. Make small adjustments according to the installation instructions, then test the movement and latching through several openings before settling on the setup.
03 · Non-Mortise Leaves for Surface Mounting
The smaller leaf nests within the opening of the larger leaf, creating a non-mortise mounting layout for a suitable door and jamb. Your installer can position and screw the leaves to compatible mounting surfaces after checking the gaps, alignment, and fixing locations.
04 · Keep the Door Open When You Need To
The specified hold-open range is approximately 90°–160°, allowing a properly fitted door to stay open within that range. Bring it back below 90° to return to the closing range. Check the available wall and trim clearance when planning the swing.
05 · Aluminum Construction at the Door Edge
An aluminum housing, cylindrical barrel, and cutout mounting leaves give the hardware its distinctive profile. The closing mechanism is contained in the hinge assembly, keeping the visible installation concentrated along the door's edge.
06 · Choose Black or Silver for Your Room
Pick Black for a strong contrast against light trim, or Silver for a bright metal finish. Each option contains one hinge in the selected finish, so you can order the quantity your installation requires.
Black · Single Pack
Silver · Single Pack
07 · Plan for Left- or Right-Handed Doors
The hinge design supports left- and right-handed door installations. Check the door, jamb, mounting positions, required hinge quantity, and clearance with your installer, especially when replacing existing hinges whose hole pattern may differ.
Check the Measurements Before Installation
The overall barrel height is approximately 5.78 inches, and the larger mounting leaf is approximately 5.2 inches tall. The barrel diameter is about 0.98 inch. Use these measurements with the pictured leaf shape and mounting layout to check the fit of your door and frame.
Prepare the Fit, Then Set the Closing Action
Have a qualified installer check the application and follow the supplied installation instructions. Alignment and adjustment are part of achieving the intended door movement.
- Check the door and jamb, required hinge quantity, hinge size, fixing positions, swing direction, and clearance before removing or replacing hardware.
- Position the leaves in the correct orientation and fasten them to suitable mounting surfaces using appropriate fixings.
- Use the hex-key adjustment points according to the instructions to tune the closing force and action.
- Test the full movement, the closing and latching action, and the hold-open range. Recheck alignment and adjustment before putting the door into everyday use.
Product Details
- Pack: 1 hinge in the selected finish
- Finish choices: Black or Silver
- Construction: Aluminum hinge housing with cylindrical barrel and non-mortise leaves
- Overall barrel height: Approximately 5.78 inches
- Large mounting-leaf height: Approximately 5.2 inches
- Barrel diameter: Approximately 0.98 inch
- Leaf thickness: Approximately 0.12 inch
- Hold-open range: Approximately 90°–160° with suitable installation and adjustment
- Maximum specified opening: Approximately 175°; check actual installation clearance
- Handing: Left- or right-handed installations, subject to door and frame fit
A Few Helpful Answers
How many hinges are included?
Each pack contains one hinge in your selected finish. Black and Silver are separate finish choices. The total hinge quantity required depends on the door and its installation, so check this before ordering.
Will the door close from every angle?
The specified closing range is below approximately 90°. The approximately 90°–160° range is a hold-open area. Correct installation and adjustment are required, and the door's available clearance must be checked.
Can the closing action be adjusted?
Yes. Hex-key adjustment points are provided to tune the closing force and action. Follow the installation instructions and test the door and latch after making adjustments.
What does non-mortise mean?
The narrow leaf nests into the opening in the larger leaf, forming a surface-mounting layout. Your installer should still check the mounting surfaces, door gap, alignment, and fixing positions for the particular door.
Can I use these on a left- or right-handed door?
The design supports either handing. Check the correct orientation, mounting layout, and door/frame clearance with your installer before fitting.
Will the screws line up with my old hinges?
Existing hinge sizes and screw patterns vary. Compare the pictured dimensions and hole layout with your door and frame; an exact match to existing screw holes should not be assumed.
Choose the Finish for Your Next Door Update
Check your installation fit and required hinge quantity, then choose a Black or Silver single pack using the purchase options.
Choose Black or Silver
